Fix You do not have permission to access contact your network administrator to request access

Fix You do not have permission to access contact your network administrator to request access. In this article, Theartcult will share a troubleshooting guide for file sharing or networking between two computers. Unfortunately, Windows can be complicated, and while you may think everything will work, accessing the share on another computer may fail.

So, if you can’t access the share on another computer on the same network, try the following troubleshooting tips!

Fix You do not have permission to access contact your network administrator to request access
Fix You do not have permission to access contact your network administrator to request access

What Causes the Error?

Check out the list below in order to see the most common causes for this specific problem. Identifying the correct cause is the first step in resolving the problem successfully and you should definitely check this out:

  • If you are trying to access a shared printer on the network, you should enable file and printer sharing on the host computer.
  • In order to access a remote server or computer, Windows sometimes needs to have a credential in order to trust the connection. Make sure you add it.
  • If all computers connected to the network don’t support the same type of encryption, problems like this are bound to occur.

If you have this problem on your Local Area Network  now I don’t think you really have to worry about it because with the help of this guide I will definitely help you by showing you how you can allow the computer to read or write files and folders on the shared drive on your Windows Network Place  location.

Fix You do not have permission to access contact your network administrator to request access

Usually, the Access Refused Refused  by Network error occurs due to some network related permission problem but sometimes there are several or more reasons for this error appearing on your computer screen and here is a list of possible computer reasons:

Incorrect LAN connection
Inappropriate LAN sharing settings
Inappropriate folder or folder security settings
Windows Registry Got Corrupted

1 # Solution To Fix – Invalid LAN Connection and Settings Sharing

If you have recently created a LAN connection, or possibly started sharing files, or changed your LAN Wire or Modem, or possibly made any changes in your LAN settings, in which case, I suggest you see the section “How to Set Up a Connection of Two Computers Over LAN In Windows? “First thing you know, did you do this on your LAN  properly or your network settings are not correct.

If any of the unique sharing settings are incorrect, there’s a 100% chance you’re having problems with your computer.

2 # Solution To Fix – Folder Security Settings or Security Settings Deny Access

80% of you will solve the problem by following this solution because most of the people forget to change the security settings while creating a local connection in their network.

Now, I will show you how to allow every device on your network to read and write specific drives or folders. If you have problem with all network drives and folders and want to give permission to all shared folders or drives then you just need to repeat all these steps let me show you and modify the same. configuration for all drives or folder security settings.

Step 1 – Allow Sharing with Everyone

First, you have to right-click on that drive or the folder that you want to share.
Then, in the  properties  of the folder or drive, select the tab “Sharing” and click the button “Advanced Sharing…”.
Then, tick the  “Share this folder” button.
Then, click the button “Permission”.
Now add the user everyone then check the full permission item permission.

  • Step 2 – Add Username “Everyone” In Security To make that shared drive accessible from any computer.
  • Now you will have to go back to the properties window of the drive or folder and this time select the Security tab from the top menu and click the  ”Edit…” button.
    Then, click the button “Add…”.

  • Then, click the button “Advanced…” to find the username.
    Now, click the button “Find Now” to have your computer show you a list of all available users.
    Now find the username called  “Everyone” from that list, and select it and click “OK”.
    At this point, you will see the username “Everyone” shown in the list of settings. So now you just need to click “OK” to add this user in the main security list.

Step 3 – Allow Allow Full “Permission” for Username “Everyone” To perform granting this access permission for that drive or folder is complete.
Now click on the username “Everyone” and then tick the Full Control option and then click on “Apply”.

You will then be able to see windows open and apply the settings to all your files and folders. So at this point you will just have to watch that process until it is completed and make sure you don’t click the cancel button or else you will get the same problem while visiting a future file number.

You can then read and edit the files on the drive as soon as the run is complete.

Error cannot access shared folder

Instructions to fix the error \\computer name is not accessible. You might not have permission to use this network resource. Contact the administretor of this server to find out if you have access permissions. The specified server cannot perform the requested operation.

Fix: You restart 2 computers that you can’t access are fixcan be

is not accessible. you might not have permission to use this network resource windows 7, computer is not accessible. you might not have permission to use this network resource, is not accessible. you might not have permission to use this network resource windows 10, you do not have permission to access contact your network administrator windows 10, is not accessible you might not have permission windows 10, server is not accessible. you might not have permission to use this network resource, samba share is not accessible you might not have permission, pc not accessible on the network windows 10,

Image

Please go through it may help you….

You might not have permission to use this network resource | Contact  the administrator :  Solved.

Solution 1:- 

Error Message:-  \\Localhost is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

Step 1 :-  disable the antivirus…..program

step:- 2.. check the firewall settings..

Steps 3:- go to control panel….. user account ……. manage credentials………… and from the save password 
valet remove from the list of the save  password and  open again the network… and remove the save credential.

Solution 2Enable File Sharing for Deᴠiᴄeѕ that uѕe 40- or 56-bit Enᴄrуption

 

  Control Panel > Network and Sharing Center  >  Advanced sharing settings > All networks  Choose option 

 

Enable file sharing for devices that use 40- or 56 bit encryption.

 

Image

Hopefully this article would help you! 
 
Visit Macwintips.com to update the most practical and useful tips for Mac and Windows!