El Capitan System (10.11) requirements for upgrade

El Capitan System (10.11) requirements for upgrade -MacBook Pro mid 2012 update to Catalina. 10.12 requirements, upgrade to mojave, el capitan to big sur migration, MacBook Pro mid 2012 update to Catalina, Upgrade macOS Sierra, El capitan appstore, Download macOS Sierra, macOS El Capitan,The new Mac OS X El Capitan will be released by the end of June of 2015, and the hardware system requirement can be enormous. Your hardware should be able to run the latest Mac OS X El Capitan if it has OS X Yosemite or OS X Mavericks: these two are the basic hardware requirements you should consider. However, if your system doesn’t meet these basic requirements, you don’t have to get out of your way and purchase a new hardware, for most of the Mac OS released in the past 5 years will be supported.

Table of Contents:

El Capitan System (10.11) requirements for upgrade

This tip is part of a series of tips for : Mac OS X 10.4, 10.5, 10.6, 10.7, 10.8, 10.9, 10.10, 10.11 El Capitan,

10.12 Sierra, 10.13 High Sierra, 10.14 Mojave, 10.15 Catalina, 11.0 Big Sur.

10.11 is not to be confused for 11.0 Big Sur. 5 years separate their release.

If a Mac shipped new with 10.11 it can be updated to 10.14 Mojave direct from the Mac App Store.

If it is not running 10.12 yet, but was prebundled with 10.11, it can be upgraded to 10.12 first, then upgraded to Catalina.

Backup your data first.

Go to Apple menu -> System Preferences -> Date and Time and select the closest time server to set your time, and do so. Download based on manual time may fail, especially on older systems where the system time is not set right.

Note, some downloads from Apple do not work in Safari for earlier Mac OSes, see this tip if you find you can’t download them anymore, to find a browser that will work. Additionally the certificates may make a download appear not available.

https://support.apple.com/en-us/HT211683 offers instructions to get the download link for El Capitan installs on top of older operating systems.

Please note: Night Shift, and two factor authentication needed to unlock AppleID accounts did not come about until 10.12.4 on Mac OS.

Some downloads may error out because of date. This thread discusses how to force the date:

https://discussions.apple.com/thread/252534720

If a Mac is already running 10.12, and it is older than 10.12, you must format a separate GUID HFS Plus partition to install 10.11 or earlier on it. The reasoning is starting with High Sierra HFS Plus is automatically formatted on SSD and thumb drives.

If a Mac has 10.8 on it, it can be upgraded to 10.13 High Sierra if it doesn’t meet 10.14’s requirements but does 10.13’s.

If a Mac has 10.7.5 or later on it, it can be updated to 10.12 Sierra if it meets 10.12’s system requirements. 10.12’s availability just became known to the author of this tip on October 1, 2018.

These tips all refer to the client version. If you are using Mac OS X server, please check: Server forums

for more posts on Mac OS X Server.

Some important dates:

September 17, 2018, Apple released iOS 12. Synchronizing with it needs El Capitan or newer on a Mac.

El Capitan is only available to those who downloaded it before, or have 10.6.8 installed. Sierra is available to

those with preloaded 10.7 or later Macs. Either one can be installed on its own partition to allow compatibility with older apps while synchronizing iTunes with iOS 12.

September 25, 2017, Apple replaced Mac OS Sierra with Mac OS High Sierra on the Apple Mac App Store.

September 20, 2016, Apple released Mac OS Sierra and changed the minimum system requirements of its operating system.

September 30, 2015, Apple released Mac OS X 10.11, El Capitan.

December 8, 2015: Apple fixed issues with Image Capture scanning that existed with 10.11.0, and 10.11.1, with the release of 10.11.2 at least for the Canon Pixma MX922, and probably other multifunction printers and scanner…

January 19, 2016: Apple released 10.11.3.

January 27, 2016: Apple has updated support links for several printers on 10.11.

March 12, 2016: This tip got updated with additional links from January 27, 2016 updates, and manufacturer El Capitan Printer and Scanner drivers.

March 21, 2016: 10.11.4 was released.

May 16, 2016: 10.11.5 was released.

July 18, 2016: 10.11.6 was released

July 19, 2017: 10.11.6 Security update was released: Security Update 2017-003

September 20, 2016, Apple released Mac OS 10.12, Sierra. El Capitan is no longer available except to people who purchased machines with it, and purchased it for download before Sierra’s release.

Apple has now made the official releases for El Capitan through Mojave available on their support pages:

https://support.apple.com/en-us/HT206886 10.11 El Capitan

https://support.apple.com/en-us/HT208202 10.12 Sierra

https://support.apple.com/en-us/HT208969 10.13 High Sierra

https://support.apple.com/macos/mojave 10.14 Mojave

There has been limited success installing 10.11 directly onto 10.8.5.

Note: The 6 GB file takes approximately 37 minutes at 25 Mbps. After

which point you’ll have to check through the license agreement and then it will proceed with the installation of about 24 minutes. That 24 minute installation may be longer depending on the capacity and memory support of your system, and should not be regarded as an exact time. If it takes longer than 2 hours in the 24 minute process, feel free to post on the forum to ask if there is something that might have been overlooked.

Before installing, be sure to backup your data:

https://discussions.apple.com/docs/DOC-1992

iPhoto moved to the Pictures App which loses some capabilities in Mac OS X 10.10.2 and later. This tip explains how to keep both:

Apple iPhoto and Photos on the same install

And make sure your system is otherwise functional.

Also if you are upgrading from 10.6.8 or earlier, please read this tip first, as the “free” upgrade may cost a lot more, given that Apple

has not supported a software allowing older applications since the release of 10.7:

https://discussions.apple.com/docs/DOC-6271

Then look at the software reports after 10/1/2015 on http://roaringapps.com/apps?platform=osx

Don’t just consider the table having a green circle saying that it is compatible as people have been testing with pre-release versions of 10.11, and may have reported it in there. The only release version of 10.11 tests could have been performed on 9/30/2015 or later.

There are some known issues with Microsoft Office that they have listed on their knowledgebase and they have issued 14.5.6 & 14.5.7 of Office 2011 to address these.

El Capitan Compatible printer and scanner models that are on Apple’s knowledgebase article are available. Additional entries are on printer websites with Apple software update links below:

Brother (Oct 8, 2015),

Canon Laser (Nov 3, 2015)

Epson January 27, 2016

Lexmark (Jan 27, 2016)

Xerox/Fuji (January 27, 2016)

Gestetner Printer (January 27, 2016)

Infotec (Januay 27, 2016)

Lanier (January 27, 2016)

Savin (January 27, 2016)

Ricoh (January 27, 2016)

NRG (January 27, 2016)

Printers on the article that are not reflected by those downloads have El Capitan drivers available directly from their vendors, as listed below:

HP – http://support.hp.com/us-en/document/c04473034 has more direct info about compatible printers on their support documents page including 10.11 compatibility.

Canon has this page to find if your printer is El Capitan Compatible:

https://www.usa.canon.com/internet/portal/us/home/support/self-help-center/Mac-O SX-Compatibility/

Kodak has a generic 7.9 driver for all in one printers and El Capitan: http://support.en.kodak.com/app/answers/detail/a_id/17378/selected/true

Dell’s listing is here: http://www.dell.com/support/Article/us/en/19/SLN299394/EN

Samsung gave me the Yosemite & El Capitan printers via their online support chat, as they have not made a specific page for these:

Sl-C1810, Sl-C1860, SL-C410, SL-M2020, Sl-M2070, SL-M2835, SL-M2875, SL-M2885

There may be open source drivers that work as well, that have not be investigated by me, though are put on my own personal FAQ*: http://www.macmaps.com/printersx.html

10.11.2 patches some issues with 10.11 and automatic document feeder scanning from the Canon Pixma MX922, and may help other scanners that no longer had their Image Capture interface for the document feeder.

Also found with another copy of 10.11.2, was the Canon MX922 was automatically recognized on launch, and with waiting for the dialog, it was able to locate the right drivers to download automatically.

I’m watching responses to my thread here to find out if there are other printers other than that which I own:

Some good news, and a question

Apple has released RAW camera update for 10.11 here:

Digital Camera RAW Compatibility Update 6.17

Additional updates may come with a newer version, and can be searched on your favorite internet search engine.

From http://www.apple.com/osx/how-to-upgrade/#hardware-requirements

Apple lists the following models whose Machine ID found in your System Profiler application.

Compatible with most features:

MacBook (Early 2015) [8,1]
MacBook (Late 2008 Aluminum, or Early 2009 or newer) [5,1 or 5,2]
MacBook Pro (Mid/Late 2007 or newer) [3,1]
MacBook Air (Late 2008 or newer) [2,1]
Mac mini (Early 2009 or newer) [3,1]
iMac (Mid 2007 or newer) [7,1]
Mac Pro (Early 2008 or newer) [3,1] *
Xserve (Early 2009) [3,1]

* Note: As the model #s are very similar to 10.8, 10.9, and 10.10, it is possible that the solution that allows earlier Mac Pros to be used may be feasible for 10.11.

That solution is here: 1,x to 2,x not officially supported solution (for Mountain Lion) No one has yet reported trying this on anything later. Note, the 2018 El Capitan Security updates do not work well with these older Mac Pro models.

Other models mentioned for unique features of 10.11 include:

MacBook Pro (2012 or newer) [9,1]
MacBook Pro with Retina display (Mid 2012 or newer) [10,1]
MacBook Pro (Mid 2012 or newer) [9,1]
MacBook Pro (Early 2011 or newer) [8,1]
MacBook Pro (Late 2008 or newer) [5,1]
MacBook Air (2012 or newer) [MD508LL/A, 5,1]
MacBook Air (Mid 2012 or newer) [5.1]
MacBook Air (Mid 2011 or newer) [4,1]
MacBook Air (Late 2010 or newer) [3,1]
Mac mini (2012 or newer) [6,1]
Mac mini (Late 2012 or newer) [6,1]
Mac mini (Mid 2011 or newer) [5,1]
Mac mini (Mid 2010 or newer) [4,1]
iMac (2012 or newer) [13,1]
iMac (Late 2012 or newer) [13,1]
iMac (Mid 2011 or newer) [12,1]
iMac (Early 2009 or newer) [9,1]
Mac Pro (Late 2013) [6,1]
Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010 or newer) [4,1]

10.11.1, 10.11.2, 10.11.3, 10.11.4, 10.11.5 Combo, and 10.11.6 are also available.

Another similar tip for 10.11 compatibility on audio applications is here:

https://discussions.apple.com/docs/DOC-9121

One person wrote a tip how to use a second Mac to get the installer for El Capitan onto their machine:

https://discussions.apple.com/thread/252346038

macOS Catalina is compatible with these computers

You can install macOS Catalina on any of these Mac models. This list will be updated as other compatible models become available.

If you’re using one of these computers with OS X Mavericks or later, you can install macOS Catalina. Your Mac also needs at least 4GB of memory and 12.5GB of available storage space, or up to 18.5GB of storage space when upgrading from OS X Yosemite or earlier. Learn how to upgrade to macOS Catalina.